90° Leather Adhesion Rig

Leather finish measurement is crucial in the leather industry for evaluating and ensuring the quality, appearance, and performance of leather products. The leather finish refers to the final layer or coating applied to the surface of leather, which can impact various attributes of the finished product. The leather finish significantly influences the appearance and visual appeal of leather products. Measuring the finish ensures that it is evenly applied and consistent, resulting in a uniform and attractive appearance. The finish can alter the texture and tactile qualities of leather. Measuring finish application helps ensure that the desired texture and hand feel are achieved, providing a satisfactory tactile experience to consumers. Leather finishes also often provide protection against moisture, stains, and wear. Measuring finish thickness and coverage ensures that the leather is adequately protected, enhancing its durability and longevity.

Used in ISO: 11644 for determination of the adhesion of the finish to the leather.

Full installation instructions are provided within the Education Zone of the latest Exponent/Connect software version and on the technical information sheet accompanying this product.

Stable Micro Systems probes and attachments are commonly made from four materials: anodised aluminium (AA6082 T6), stainless steel (316 T), Delrin (acetyl copolymer) and Perspex (polycarbonate).

In general use, probes and attachments made from these materials will be suitable for testing food products and inert non-food materials.

The four materials listed above are not universally resistant to all types of chemicals and as such the compatibility of the probe/attachment material with the product (to be tested) must be established to prevent damage to the probes and attachments. If the compatibility of the product with the probe is unknown to the customer then the chemical information about the product (Material Safety Data Sheet or Product Data Sheet) should be submitted to Stable Micro Systems. Stable Micro Systems will then assess the suitability of the probe/attachment material for use with the product and advise accordingly. If this advice is not sought then Stable Micro Systems will not accept liability for probes/attachments damaged by chemical attack from the product being tested.

All probes and attachments may be cleaned in warm (or hand hot) water using a mild detergent. A soft brush may be used but abrasive cleaning aids should be avoided. Stable Micro Systems products should not be microwaved or cleaned in a dishwasher.

Screw threads should be lightly lubricated after drying using a light lubricant, e.g. petroleum jelly, mineral oil. This will aid the fitting and unscrewing of the item. Each component of a probe or attachment should be wrapped separately when stored, to avoid scratching or chipping. This will safeguard against any unnecessary damage to the accessory.